Length
Width
Height
60580-6
24380-5
26700-5
By length
By height
5853±3
2259±3
Bursting disk and pressure gauge may be installed at customers request
P355NL1, P355NL2
DIN 10028-3
LPG and Ammonia Tank Containers TCM5-25
A,B,C,D
|
Tank-containers Main page | ||
| Description (ISO Standard) | |||
| Technical specification (ISO Standard) | |||
| home | about company | contacts | List of the goods |
| Parameter | Parameter value |
| Container type | UN T50 (IMO 5) |
| Maximum gross mass, kg | 24000 |
| Tare mass, kg | 8930 |
| Maximum payload, kg | 15070 |
| Tank Capacity, liters (deviation from the nominal, %) | 24700 (±1%) |
| Maximum filling rate, kg/l | 0.61 |
| Maximum allowable working pressure, MPa | 1.8 |
| Test pressure, Mpa | 2.7 |
| Set pressure, MPa | 1.85 |
| Full flow pressure (no less than), MPa | 1.98 |
| Bursting disk break pressure (if installed) not more than, kg | 1.98 |
| Maximum allowable mass of top containers at stockpiling, kg | 192000 |
| Internal diameter of tank shell, mm | 2375 |
| Internal diameter of dished ends, mm | 2375 |
| Type of dished ends | Elliptical, the ratio of dished end depth to its internal diameter is 1/4 |
| Nominal wall thickness of the tank shell, mm | 16 |
| Nominal wall thickness of dished ends, mm | 17 |
| Overall dimentions, mm
Length |
60580-6 |
| Center to center distance of
coner castings apertures, mm
By length |
5853±3 |
| Safety valve |
Fort Vale
006/22685 Bursting disk and pressure gauge may be installed at customers request |
| Liquid phase loading/discharge
device |
Fort Vale footvalve, 252/3750 ballvalve 370/3335, outlets 252/0077. Flow diameter 50mm, connection - standard 3¼ |
| Gas phase loading/discharge
device |
Fort Vale footvalve, 252/3760 ballvalve 370/3335, outlets 252/0087. Flow diameter 50mm, connection - standard 1¾ |
| Manhole | Internal diameter 500mm compression outline and control of pressurization are outside the container |
| Cargo level gauge | Two level ultrasonic device with no cargo vapour outlet into the atnosphere |
| Sun and fire shield | Two-ply, with a special fire prevention covering |
| Temperature operation range, °C | -40 ... +55 |
| Tank material | Low alloy steel
09G2S-14, GOST5520-79 P355NL1, P355NL2 DIN 10028-3 |
| Material of the end frames and elements fastening the tank to the frames | Low alloy steel 09G2S-14, GOST19281-89 |
| Time before the safety relief valve operates in conditions of a fire of petroleum products (not less than), min | 60 |
| Terms of operation (up to write-off), years | 30 |
TECHNICAL CHARACTERISTICS OF THE AMMONIA TANK-CONTAINER
TCM5-25B (bottom discharge) and
TCM5-25D (top discharge)
| Parameter | Parameter value |
| Container type | UN T50 (IMO 5) |
| Maximum gross mass, kg | 24000 |
| Tare mass, kg | 10130 |
| Maximum payload, kg | 13870 |
| Tank Capacity, liters (deviation from the nominal, %) | 24700 (±1%) |
| Maximum filling rate, kg/l | 0.56 |
| Maximum allowable working pressure, MPa | 2.2 |
| Test pressure, Mpa | 3.3 |
| Set pressure, MPa | 2.25 |
| Full flow pressure (no less than), MPa | 2.42 |
| Bursting disk break pressure (if installed) not more than, kg | 2.42 |
| Maximum allowable mass of top containers at stockpiling, kg | 192000 |
| Internal diameter of tank shell, mm | 2375 |
| Internal diameter of dished ends, mm | 2375 |
| Type of dished ends | Elliptical, the ratio of dished end depth to its internal diameter is 1/4 |
| Nominal wall thickness of the tank shell, mm | 20 |
| Nominal wall thickness of dished ends, mm | 20 |
| Overall dimentions, mm
Length |
60580-6 |
| Center to center distance of coner
castings apertures, mm
By length |
5853±3 |
| Safety valve |
Fort Vale 006/22685 Bursting disk and pressure gauge may be installed at customers request |
| Liquid phase loading/discharge device
|
Fort Vale footvalve, 252/3750 ballvalve 370/3335, outlets 252/0077. Flow diameter 50mm, connection - standard 3¼ |
| Gas phase loading/discharge device
|
Fort Vale footvalve, 252/3760 ballvalve 370/3335, outlets 252/0087. Flow diameter 50mm, connection - standard 1¾ |
| Manhole | Internal diameter 500mm compression outline and control of pressurization are outside the container |
| Cargo level gauge | Two level ultrasonic device with no cargo vapour outlet into the atnosphere |
| Sun and fire shield | Two-ply, with a special fire prevention covering |
| Temperature operation range, °C | -40 ... +55 |
| Tank material | Low alloy steel
09G2S-14, GOST5520-79 P355NL1, P355NL2 DIN 10028-3 |
| Material of the end frames and elements fastening the tank to the frames | Low alloy steel 09G2S-14, GOST19281-89 |
| Time before the safety relief valve operates in conditions of a fire of petroleum products (not less than), min | 60 |
| Terms of operation (up to write-off), years | 30 |